4 Corner - Pulley Kit SS-18

  • 4:1 mechanical advantage
  • 1/4"  UV stabilized 12 strand polyester rope
  • Requires a cleat for tie off
  • 3/16" galvanized wire rope
  • Two wire rope clamps
  • Eight D-shackles

Pulleys are made from 5052 aluminum with stainless steel hardware and graphite embedded bushings. Pulleys are designed for smooth operation and require no other tools to hang the sail. Provides for easy install and take down. 

The galvanized 3/16" wire rope can be run through the perimeter pocket of the sail to create a complete loop using wire rope clamps to attach the wire rope to itself.  When properly installed, the hardware transfers the tensile load from the corners to the center of the sail.